Huni Badger Basic Use Instructions

* Pull off magnetic battery cover on the side of the Huni Badger to install an 18650 battery with the positive (+) and negative (-) connections matching the markings on the inside. * Pull open the magnetic cap on the bottom of the device to reveal the mouthpiece and HuniPot stored within. * Slide open the dust cover on top of the device to expose the threaded airway. * Thread in the mouthpiece clockwise until snug. * Prepare your extracts for use. * Press the power button 5 times to turn on the Huni Badger. The logo on the button will glow, the LED light turns on, and the HuniTip begins to heat up immediately. * The Huni Badger reaches operating temperature in roughly 10 seconds. CAUTION: NEVER TOUCH THE HUNITIP BEFORE IT HAS COOLED DOWN. * Inhale gently through the mouthpiece while dabbing the HuniTip directly onto your extracts. Note: The device will automatically turn off after 60 seconds as a safety feature. To continue use, press the power button 5 times and the device will be ready to go again. After Use: * Make sure device is turned off. (LED and power button light should both be off) * Unscrew the mouthpiece and shut the dust cover. * Replace mouthpiece and HuniPot back within their compartments in the magnetic cap. * Insert HuniTip into the mouthpiece compartment and secure magnetic cap.