My Thoughts on the Bambu Lab H2C After 500 Hours of Testing

I've been testing the new Bambu Lab H2C, and today I'm sharing my thoughts. I have about 500 hours on the machine at this point, and I think I have a pretty good idea of what works and what doesn't. Bambu Lab H2C 3D Printer: https://tidd.ly/3XFLS21 Bambu Lab H2D 3D Printer: https://tidd.ly/3HGpktW Bambu Lab H2S 3D Printer: https://tidd.ly/41owuK1 Bambu Lab Filaments: https://tidd.ly/4fRSpip Bambu Lab PPA-CF Filament: https://tidd.ly/41kD5VG Bambu Lab PAHT-CF Filament: https://tidd.ly/4mzkFJt *This site contains affiliate links for which I may be compensated Support Clough42 on Patreon: https://patreon.com/join/clough42 Raw Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 License http://creativecommons.org/licenses/by/3.0/ 00:00 Intro 01:06 Overview and Features 03:14 Disclosures 03:54 The Vortek Hot End System 05:31 Not Really What I Was Hoping For 07:46 The Vortek Swapping Cycle 09:31 Wireless Hot Ends 10:56 Cold Pulls: You Should Try Them 12:34 Test Prints 20:55 New Software Features 21:59 Networking, Cloud, and IoT Safety 23:24 The Heated Bed -- Is It Even? 25:52 Impeccable Bed Leveling 27:07 Problems I Encountered 30:21 Conclusions