Echo RTA By Umbrella Mods - ENG by Nameless Reviewer

#ECHO #UMBRELLA FOLLOW US ON FACEBOOK https://www.facebook.com/groups/mouthtolounge Echo RTA – Umbrella Mods The structure of the Echo is easy to use, take apart and clean. We used multiple materials for O-rings to ensure the experience. In the tank part we used silicone O-rings, Viton for the Drip-tip and the airflow ring. We ran stress test for the one-piece part to guarantee the durability, thicken and harden the plastic parts ( between the chimney and the top cap, the thickness of the inner chamber and the airflow ring etc). We made the weight less also. For the plastic parts we only use high-quality materials, the Peek and the Ultem are all imported from Germany. For the second batch we will be making amber color Ultem1000 parts as well. We specially turned the airflow experience. There are four pillars located inside the bottom of the base to cut, accelerate the airflow and make it quieter. The gap between the chamber and the tank can let you fill easily. We tested another thing, you can go through the whole tank of juice without leaving some juice on the bottom of tank like some other RTAs. The angle of the Drip-Tip’s base had been specially designed to one purpose- as less condensations goes into your mouth as possible. The space and shape of the inner chamber had been tweaked as well，the goal is to maintain a great flavor as well as the constancy ( such as less chance your cotton got dyed by the condensations). Material： Deck：Medical Grade 316SS One-Piece Chamber, Chimney and Top Cap：PEEK-Rchling Sustapeek, Ultem-GEHR Ultem1000 Tank：Food Grade Blasted PCTG Tab：Anodized Aluminum Spec： Height：30mm (without the drip tip) Diameter：22mm Weight：23g Capacity：3ml Drip-tip Height：7.6mm Airflow Pins：0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 2.6mm Airflow Slot (on the base)：1.0mm*3 holes dual side/ 4*1.2mm slot dual side.