Aspire Speeder 200W Box Mod from Healthcabin

Aspire Speeder 200W Box Mod from Healthcabin Pros: Great ergonomic design, fits in hand perfectly Straight simple menu and relatively big clear display Lightweight Cons: Power bar traveling is not that smooth. Lying in hand phenomenally, rounded without a sharp edges, lightweight (for two-battery mod). Great workmanship, quality paint job that seams it will last. The battery door is robust and secure, I don’t expect reliability issues there. It stands secure on the table, despite the lower edges are rounded. No rattle when shaking it, why would someone do that? Due to the curvature of the upper part, 25 mm atomizers will fit perfectly, but even larger ones up to 28 mm would not protrude from the mod. Maybe aesthetic will suffer just a bit... In power mode there are only rounded watts without decimals, so if you want more than 11, the next is 12 watts. Not so good for M2L users - not enough gradation. But in temperature control, the Celsius are changed by the same degree, which is great - as well as the temperature control itself. The menu is easy to use, the automatic rotation of the screen is not only gimmick, but every mod should have it and be the standard for the future. The display is relatively large, clear and readable. 510 connector is firm and robust, it accepts every atomizer that I put on it. There is no gap between atomizer and the mod like with some (or many) Joyetech mods. Of course, 510 pin is spring loaded. It's shame that they didn’t put it in the center. Speeder has a stealth mode (activated by three clicks on power bar), in which the display and the menu buttons are off. Both batteries was emptied to 2.93 volts (P.Busardo is right in his review). It's not very good for the batteries, but gets you bigger autonomy. An advantage or flaw, take your pick. Balanced charging works (almost) without faults, batteries was charged to 4.17/4.13 V according to my cheap multimeter. What about the cons? Well, first and only one (for now) is power bar traveling in off position. Sometimes gets stuck before that last part of a mm without assuring click sound at the end, even though the button on the electronic board is in the 'off' position. So nothing terrible, it's safe, just the power bar covering the real power button has rough travel to off position. Interestingly, this is more common when I ‘shoot’ with the inside of my right thumb. When I use it in my left hand rarely or almost never. Probably the angle of hitting affects it. Is it only in my sample or this whole series, I have no idea. Also, the power bar (button) needs more force to press it than any other mod that I have. A con, but also a pro, because of a less chance of accidentally pressing it in your pocket. I ordered this mod from Healthcabin on 02.08.2017, while on other places is still in pre-order. Arrived extremely well packaged with Singapore Post for 11 days, which is fast for me. Here’s the link: http://www.healthcabin.net/aspire-speeder-200w-box-mod-p/15014.html